produce max size 5L bottle/container
adopt Japan&Taiwan technology
prefect after-sale service
low price
blow molding machine
BLB65/d fully automatic blow molding machine
main technical parameter :
Apply material: HDPE, PP, PE, PVC, etc.
Production capacity: 5 L(max)
Total consumption: 42.5kw/hr.
Theory output: 300/480 per h
2.extruding system
Screw type: same distance, different depth, gradual change,
Screw diameter: 65mm
Screw L/D: 24/1
Material: 38CrMoALA treated with Nitrogen
Screw rigidity: HV700-840,
Screw brittleness: <=3 degree
Barrel material: 38CrMoALA treated with Nitrogen
Barrel rigidity: HV>=940
Barrel brittleness: <=3 degree
Driving way: invert motor and hard-teeth face gear box
Driving power: 18.5kw
Rotate speed: 0-90 rpm
Plasticizing ability: 56kg/hr.
Arrange of temp. control: ¡À0.5
Heating zones: 3
3. head of mould
Whole structure: convenient
Heating way: loop made in STS
Arrange of temp. control:¡À1
Heating power: 5kw
Heating zones: 2
Mould material: treated with Nitrogen
Temp control: Japan Mitsubishi
Core and convention of mould: a set with machine, if adding it should be paid.
4. close structure
Type: double axes, single oil jar, double way, synchronization, opening and closing speed is fast, but smoothly.
Power of pressing the mould: 57KN
Leakage in two side of mould: 130-370mm
Mould thickness arrangement: 155-300mm
Max size of mould (L*H): 350*360mm
5. machine size
3.4*2.2*2.5m
6.blow structure
Single blowing, three directions, convenient, it can protect exit of mould.
7.hydraulic system
Little noise, power cost low, smoothly, long life.
8character of control system
Automatic, high speed, controlled with computer.
9. power rewuirement
Compress air: pressure=8kg/cm2, fluent=0.8m3/min
Water: cooling water5-10, pressure=2kg/m2, fluent=3m3/hr.
Voltage: AC. 380V/50HZ 3 phase
|
Home
