1.produce MAX size bottle/container 8L
2.Japan&Taiwan techology
3.prefect sevrice
4.competitive price
5.blow moulding machine
BLB75/D blow moulding machine
1.Main technical data
Apply material: HDPE, PP, PE, PVC, etc.
Production capacity: 10L(max)
Total consumption: 62.5kw/hr.
Theory output: 240/300 per hour
2.Extrusion system
Screw type: same distance, different depth, gradual change,
Screw diameter: 75mm
Screw L/D: 24/1
Screw rigidity: HV700-840,
Screw brittleness: <=3 degree
Barrel rigidity: HV>=940
Barrel brittleness: <=3 degree
Driving way: invert motor and hard-teeth face gear box
Driving power: 30kw
Rotate speed: 0-90 rpm
Plasticizing ability: 90kg/hr.
Arrange of temp. control: ¡À0.5
Heating zones: 3
3.Head of mould
Whole structure: convenient
Heating way: loop made in STS
Arrange of temp. control:¡À1
Heating power: 6kw
Heating zones: 3
Temp control: Japan Mitsubishi
Core and convention of mould: a set with machine, if adding it should be paid.
4.Close structure
Type: double axes, single oil jar, double way, synchronization, opening and closing speed is fast, but smoothly.
Power of pressing the mould: 78KN
Leakage in two side of mould: 150-500mm
Mould thickness arrangement: 150-300mm
Max size of mould (L*H): 400*470mm
5.Machine size
3.8*2.3*2.7m
6.Blow structure
Single blowing, three directions, convenient, it can protect exit of mould
7.Hydraulic system
Little noise, power cost low, smoothly, long life
8.Character of control system
Automatic, high speed, controlled with computer.
9.Power requirement
Compress air: pressure=8kg/cm2, fluent=0.8m3/min
Water: cooling water5-10, pressure=2kg/m2, fluent=3m3/hr.
Voltage: AC. 380V/50HZ 3 phase
|
Home
