produce max size bottle/container 30L
adopt Japan&Taiwan techology
prefect after-sale sevrice
low price
plastic machine
BLB80N automatic bottle blowing machine
1.in technical data
Apply material: HDPE, PP, PE, PVC, etc.
Production capacity: 30 L(max)
Total consumption: 139kw/hr.
Theory output: 360/hr
2.Extruding system
Screw type: same distance, different depth, gradual change
Screw diameter: 80mm
Screw L/D: 24/1
Material: 38CrMoALA treated with Nitrogen
Screw rigidity: HV700-840,
Screw brittleness: <=2 degree
Barrel material: 38CrMoALA treated with Nitrogen
Barrel rigidity: HV>=940
Barrel brittleness: <=2 degree
Driving way: invert motor and hard-teeth face gear box
Driving power: 37kw
Rotate speed: 10-80 rpm
Plasticizing ability: 95kg/hr.
Arrange of temp. control: ¡À0.5
Heating zones: 4
Cooling way: blowing
Blower number: 4
3.Head of mould
Whole structure: convenient and co***ct.
Heating way: loop made in STS
Arrange of temp. control:¡À1
Heating power: 35.2kw
Heating zones: 4
Mould material: treated with Nitrogen
Temp control: Japan MITSUBISHI PLC
Core and convention of mould: a set with machine, if adding it should be paid.
4.Close structure
Type: double axes, single oil jar, double way, synchronization, opening and closing speed is fast, but smoothly.
Power of pressing the mould: 180KN
Leakage in two side of mould: 350-780mm
Mould thickness arrangement: 355-400mm
Max size of mold (L*H): 600*1000mm
5.Machine size
4.1*2.1*3.5m
6.Blow structure
Single blowing, three directions, convenient, it can protect exit of mould.
7.Hydraulic system
Little noise, power cost low, smoothly, long life
8.Character of control system
Automatic, high speed, controlled with computer
9.Power requirement
Electricity: 380V, 50HZ ,3 phase
Compress air: pressure=8kg/cm2, fluent=0.8m3/min
Water: cooling water5-10, pressure=2kg/m2, fluent=3m3/hr.
10.Mould and accessorial |
Home
